How to use
Directions for Use
Large, loose flakes of corrosion should be removed using a steel wire brush or other mechanical cleaning methods. Grease and similar stubborn contaminants should be removed prior to rust removal.
The cleaning solution may be applied by spraying or rubbing onto the rusted surface. However, the best results are achieved through immersion in the solution, which also increases the effectiveness of the product.
TED-RUST™ can be reused multiple times. Tests have shown that the solution remains effective even after 20 to 40 cycles of use.
Parts should remain immersed in the solution until rust and oxide layers are completely removed from the surface. Immersion time varies from 30 minutes to 12 hours, depending on the amount of corrosion, steel type, and temperature. Higher temperatures significantly reduce reaction time. Typically, treatment time ranges from 1 to 4 hours.
The recommended bath temperature for TED-RUST™ (TM300) is above 20°C (68°F), with optimal results at approximately 25°C (77°F). Increasing the liquid temperature (e.g., to 40°C / 104°F) accelerates the rust removal process but also increases evaporation.
After cleaning, parts should be thoroughly dried before applying further coatings such as galvanizing or painting. For long-term storage, cleaned parts should be properly protected and preserved.
Applications
Shipyards: boat and vessel repair
Aviation and aerospace industry
Mining industry
Military and defense sector
Automotive industry: corrosion protection and preparation of vehicle bodies
Chassis and engines
Steel structures
Metal processing and fabrication
Maintenance in warehouses and storage facilities
Automotive workshops and used parts yards (scrap yards)
Forensic laboratories
Conservation studios and museums (e.g., weapons and firearms restoration)
Steel sheet and non-ferrous metal processing
Pipe processing and pipeline installations
Storage and Handling
Store in a tightly closed container.
Keep in a cool place at a temperature between +10°C and +25°C (50°F–77°F).
Shelf life: 12 months from the date of manufacture.
Side Effects
Leaves no side effects such as discoloration, mechanical damage, or chemical damage to the cleaned surface structure.
Safety Information
Water-based cleaner.
Non-flammable.
The product contains mineral acids that may be harmful to skin and eyes.
Does not pose a risk to human health or the environment when used as directed.
Keep out of reach of children.
Certification: PZH.
Product Advantages
Protects against moisture.
Leaves a protective coating that provides temporary corrosion protection.
Brightens and restores non-ferrous metals.
Precautionary Measures
Use required personal protective equipment (protective gloves).
In case of contact with eyes, rinse immediately with plenty of water.
If swallowed, seek medical attention immediately.
Reviews
There are no reviews yet.